EWAC CP BF 024 Welding Electrode

 950.00 / Kilogram

Eutectrode BU 400 Ewac

EWACTRODE BU 400

Eutectrode 400

₹ 1,085/Kg

Application/Usage :

Hard facing electrode

Coating type :

Low Hydrogen

Pieces per pack :

5kg

Welding Electrode XHD 646 – 4.0MM

XHD 646

Hardness:
160 – 190
As deposited 80-90 HRb
Work hardened 28-32 HRc
Tensile Strength: 62 Kg/mm
(88,000 psi)

EWACTECDUR N 9060 4MM (EWAC)

Eutecdur 9060

₹ 13,389/Kg

Procedure: Clean weld area. Remove fatigued or damaged metal with EutecChamferTrode. Remove all sharp corners and projections. Grind all surfaces to remove oxides and other contaminants. Preheat if necessary for low carbon, air hardenable steels and cast iron. For cast iron cushion layer for Xyron 224 to be given. For air hardenable steel cushion layer of XHD 2222 to be given. Deposit the cobalt alloy. For low carbon steel the alloy can be deposited directly.

Cobalt alloy electrodes for producing excellent wear resistant overlays on carbon and alloy steels. Excellent results obtained even when high temperature service conditions prevail. Specifically provides ease of deposition and freedom from porosity, cracking and other faults common in products of this type.  

Carbon Steel EWAC XHD ABRATEC N 6710

XHD Abratec 6710

EXD ABR 6710

Typical Applications: Reclaimer bucket, stacker bucket, dragline buckets, lips, tooth points, cutting edges, scraper blades,.

EWAC Nickel Alloy XHD AbraTec N6715

XHD Abratec 6715

₹ 5,450/Kg

Typical Applications: Sinter star crusher, grate bars, clinker conveyor chains, coke pusher shoes, augers, billet conveyor guides, hot.

Carbon Steel CP HFD 011 Welding Electrodes,

₹ 800/Kg

EWAC Welding Electrodes CPCI 026

₹ 4,576/Kg

MAKE:- L&T EWAC CPCI 026

Outstanding Features:• Excellent operating characteristics.• Dense deposits with good bonding.• Optimum machinability.• Stronger than conventional nickelbased cast iron welding alloys.

Eutectrode HF 700

Welding electrode for hard facing  Special electrode EWAC alloy

Copper WELDING ELECTRODE -EXD 2800

Description

• Good resistance to saltwater corrosion and steam
• Same colour as bronze
• Easily machinable deposit
• Low coefficient of friction
• All-position weldability
• Exceptional arc stability in AC
• ApplicationsPump bodies, Propellers, Impellers , Friction bearings, Shipbuilding applications, Dissimilar joining of bronze with steel and cast iron

Xuper Nucleotec 2222 Welding Electrodes

EWAC Stainless Steel Staintrode D L&T Welding Electrode

Staintrode D

• Clean area.
• clamp long seams
• use chill bars and backing up plates
• avoid weaving

Steel Welding Electrodes – Xuper 660 Nh

Xuper 660NH

We supply a range of Steel Welding Electrodes that are widely used for crane jibs, frames, truck chassis, heavy equipment maintenance, dies, tools springs, cushion layer, joining dissimilar steels; machinable build-up and overlay, maintenance and repair welding of special composition steels used in vessels carrying chemicals or liquid gases, heavy thickness machineries, gears, furnace parts, etc. Our Steel Welding Electrodes – Xuper 660 NH are known for superb weldability, excellent impact resistance and ductility, and high strength reliability. We also cater Steel Welding Electrodes – Xuper 680 CGS that has controlled grain structure/strength and ductility and superior crack resistance. It is suitable for spray type metal transfer. Our Steel Welding Electrodes – Xuper 680 CGS gives superb weldability for all steels and also takes low amperage, whenever you strike-restrike. In addition to this, we are a reliable supplier of Steel Welding Electrodes – Xuper Nucleo Tec 2222. Our Xuper Nucleo Tec 2222 has excellent crack, corrosion and oxidation resistance and it remains unaffected by base material dilution. It is suitable for both sub-zero and high temperature service. Its exceptional combination of tensile, shear properties & impact strength makes it ideal for welding.

Tensile Strength : 57 kg/mm2 (81,000 psi).

Stainless Steel 2.5 mm x 350 mm EWAC EUTECTRODE 670

2.5MM

₹ 4,666/Kg

Highest chrome-nickel content. Recommendation: Universal electrode for joining and overlaying all types of steel for high strength with high heat and corrosion resistance. Exceptionally easy to handle, either with a short arc or as a contact electrode. Special Frigid Arc coating permits lowest operating amperages, eliminating distortion and warping. Use as overlay for wear resistance and impact strength. Ideal for most stainless steel, mild, high alloy and special steel. High chromenickel content. 

Nickel Alloy EWAC L&T Electrode XHD 2222

XHD 2222

Xuper 2222 XHD is a nickel-based electrode formulated for high-speed, high-deposition welding of critically stressed applications. Deposits exhibit superior crack resistance and ductility

Cast Iron Ewac Electrode XYRON 242 4MM

XUPER XYRON 242

Cast welding electrtode. Special casting electrode. Make-Ewac

Mild Steel L&T Welding Electrode EXD 646

We are Dealers and distributors of Ador, Superon,Esab, D&H, Great Yuva, Carborundum, Modi and Royal Arc. We Dealing All products Welding Consumables, Safety Equipment, Welding Accessories, spares Etc. 

EWAC Stainless Steel Tooltectic 6HSS L&T Welding Electrode

EWACTOOL 6HSS

• Post heat large and complocated sections.
• Ensure that all areas to be welded are free from contaminants,damaged and fatigued base material.
• Preheat electrodes to 100 deg .
• before use.
• Employ a short are lenght

Alloys Steel Welding Electrode WUNDER PROTOTEC D2D2

MAKE– L & T EWAC

WUNDER PROTOTEC D2D2

Typcal Applications:
Maintenence and repair of high alloy steels subjected to cryogenic & thermal cycling, joining & repair of heavily restrained and massive sections, draw bars & connecting hitches, tongs, flame hardening equipment, heavy cross sections gears, furnance parts, klin tyres.

Eunitrode D Welding Electrodes

EUNITRODE D

Product Specification

Mild Steel EWAC – 3.15mm Wunder 660 ZH Welding Electrode

Moisture resistant electrode to weld low alloy and high tensile steels.
Typical Applications:

• Crane jibs, frames, truck chassis, heavy equipment maintenance.

Outstanding Features:

• Low hydrogen electrode with non-hygroscopic coating.
• Suitable for cast steels containing Sulphur and phosphorous. Especially added by OEM for better castability / machinability.
• High arc force purges out impurities.
• High tensile, ductility and crack resistance. Anti-spalling under extreme pressure.
• X-ray quality weld deposits.

Recommendation:

• For medium carbon steel, low alloy and high tensile steel, ‘problem’ steel and structural steel sections. Elements like sulphur, phosphorous etc. which produce porosity are
• purged from molten pool by electrode arc action.

Procedure:

• Clean weld area. Maintain medium to short arc length. Horizontal fillet welds can be made using the contact technique. Vertical joints should be welded from the bottom up by weaving rapidly. Do not whip. Slag is easily removed by chipping.

Wunder 680 Welding Electrode -DIE STEEL

WUNDER 680

Electrode for joining dissimilar steel with high toughness, strength and ductility.
Typical Applications:

• Joining dissimilar steels, dies, tools, springs, machinable build-up & overlay.
  Outstanding Features:
  • Refined grain structure with improved strength and ductility.
  • Superior crack resistance.
  • Spray type metal transfer.
  • Joining steels of unknown composition.
  • Machinable built up and overlay.
    Recommendation:
    • Cold arc coating plus high alloy core generates highly ionized arc for spray transfer of weld metal. Addition of special micro alloying elements produces refined grain structure.
    • Recommended for similar and dissimilar steels. Suitable for joining steels of different section thickness.
      Procedure:
      • Clean weld area. Bevel heavy sections. Tilt electrode 10°-15° in direction of travel. Burn-off rate is rapid and uniform permitting rapid advance with no “sticking” or “drifting”. Restrict weaving to 2-3 X electrode diameter. Peen to relieve stresses. Slag releases easily. Restrict Preheat to 150°C max.

Cast Iron Welding electrodes Castaron 224

CASTRON 224

Nickel Alloy 3.15 mm x 350 mm WUNDER 2233

FOR MACHINABLE WELDING OF CAST IRON WITH MAXIMUM STRENGTH AND CRACK RESISTANCE

Viscosity 12mm Ewac Nicro 650, For Refineries

Specially Engineered Nickel-Chromium Alloy Electrode for Welding and Surfacing of Dissimilar Steels and Nickel Alloys

TERRA CI 94

Stainless Steel Terrahard 85 EWAC Welding Electrode

• Remove surface contamainants and damaged base matterial
• Manganese steel
• Maintain arc length approximately 1.5 times the electrodes diameter

Mild Steel 350,450MM L&t Ewac Terra Build 84

TERRA BUILD 84

We, A. N. Gupta & Co., are offering a wide range of varieties in industrial nd commercial products. We are doing this business for more than 20 years with extreme loyalty and honesty. We always put our customer’s satisfaction in our top most priority list.

XHD 2800 ac / d

Ewac Copper Welding And Brazing Electrodes

Xuper 2800 XHD

High stength bronze electrode for welding of bronze Brass , carbon steel and cast iron OUTSTANDING FEATURES * Excellent weldablity on ac/dc * Dense porosity – free desposite which are fully machinable and colour match to bronze

L&T Ewac Alloy Welding Electrodes XUPER 16 XFC

XUPER 16XFC

We, A. N. Gupta & Co., are offering a wide range of varieties in industrial nd commercial products. We are doing this business for more than 20 years with extreme loyalty and honesty. We always put our customer’s satisfaction in our top most priority list.

welding rod dealers in Bhubaneswar

welding electrode dealers in Bhubaneswar

Welding Electrodes And Rods In Bhubaneswar

Top welding electrode dealers in Bhubaneswar

Popular Welding Electrode Dealers in Bhubaneswar

Top Welding Rod Dealers and Suppliers in Bhubaneswar

ESAB Welding Electrode Dealers in Bhubaneswar

Stainless steel welding rod suppliers in Bhubaneswar

Welding electrode dealers in Bhubaneswar price list

Welding electrode dealers in Bhubaneswar contact number

Welding rod dealers near me in Bhubaneswar

ESAB electrode distributors Bhubaneswar

Best welding electrode wholesalers in Bhubaneswar

hard-facing electrodes in Bhubaneswar

leading welding electrode wholesaler in Bhubaneswar

Ador Fontech LH 104 Steel Welding Electrodes

Low hydrogen electrode for medium-tensile, ductile steel welds TECHNICAL DATA Tensile Strength: 82, 000 PSI Elongation: 29% TYPICAL APPLICATIONS Used for joining and building up of low and medium carbon steels. Ideal for joining dissimilar sections, restrained joints and oil soaked parts, castings. Can also be used as a cushioning alloy under hardfacing deposits. Finds applications in pressure vessels, pipes, flanges, vehicle chassis, cross members, gun plates, heavy machinery parts, steel castings, C-frames, H-frames, crusher rotor discs, etc.

Mild Steel Ador Fontech LH 106 Welding Electrode

Product Details:

• UTS : 75-85 kgf/mm²
• Elongation : 22-26% 
• Sizes Available:1.6, 2.5, 3.2, 4.0. 5.0 mm
• Length Available: 1.6×250, 2.5×350, 3.2×350, 4.0×350, 5.0×350
• Amps Available: 25-35, 50-75, 70-110, 90-140, 140-180

Properties:

• So-arc, smooth, defect-free ferriticaustenitic weld metal with approx. 30% ferrite content. 
• High strength and crackresistance. Deposit is work-hardening, shockproof and resistant to friction and corrosion.
• Easy to use at low currents and in all position. 

Procedure:

• Clean the weld area thoroughly and prepare joint edges. 
• Preheat high alloy and high carbon steel to about 200-250°C followed by slow cooling aer welding. 
• Hold short arc and adopt stringer bead technique. 
• Hot peening is advisable on joints.

Applications:

• Heavy machinery parts, earthmoving equipment parts, automobile springs, trunnions of cement mills, parts subject to heat, corrosion and impact. 
• Joining and surfacing of high carbon, low and high alloy steels, tool steels, spring steels, manganese steels, case hardened steels, high speed steels, cast steels, difficult to weld steels and unidentified steels. 
• Joining dissimilar steels. Surfacing of grooved rolls and repair of dropforge dies. 
• Used as cushioning alloy under-hard deposits

ALLOY BASIS: Cr, Ni, Mn

Stainless Steel LH 106 SMP

Ador Fontech LH 107 Steel Welding Electrodes

Features:

• Electrode for high resistance to heat and corrosion
• Used For Joining And Surfacing Of All Types Of Steels

Application:

• Alloy Steels
• Resistant Steels
• Manganese Steels
• Dissimilar Steels
• Fabricating And Repairing Of Valves
• Gas Turbines
• Cladding Carbon Steels

Ador Fontech LH 108 Steel Welding Electrodes

Features:

• Electrode for welding austenitic manganese steels
• Used for joining Austenitic Manganese Steels

Application:

• Alloy Steels
• Resistant Steels
• Manganese Steels
• Dissimilar Steels
• Fabricating And Repairing Of Valves
• Gas Turbines
• Cladding Carbon Steels

ADOR ALUMINIUM ELECTRODE LH 109

Product Specification

Product Description

LH 109 ALUMINIUM ELECTRODE

Ador Fontech lh 1105 steel welding electrodes

Features:

• Extra Low Hydrogen Controlled Electrode With Good Ductility And Creep Resistance
• The Electrode Can Be Used For Welding Low-alloy Steels In Thermal-power Stations

Applications

• Kiln shell welding
• Sluice Gates
• Boiler Tubes
• Especially For Welding Of Tubes

Polished Mild Steel Ador Fontech LH 111 Cast Iron Welding Electrodes

Hot and cold welding on grey cast iron. Repair of machine frames, bearing blocks. Ideal for salvaging foundry castings, gear boxes, machine housing, sugar mill rollers and cast iron dies, Ni hard pumps. For joining cast iron to mild steel.

Ador Fontech lh 115 cast iron welding electrodes

Features

• Electrode for cold welding of cast iron
• A unique electrode for cold welding of cast iron
• Also suitable for surfacing cast iron parts

Application:

• Repairing Intricate Cast Iron Parts
• Water Pump Housing
• Electric Motor Bodies And Covers
• Machine Frames
• Cylinder Blocks
• Sugar Mill Rollers

Ador Fontech lh 113 f cast iron welding electrodes

Features

• Specially designed electrode for cold welding of cast iron with good machinability
• Best suited for welding and repairing of all cast iron components.

Application:

• Machine Housings
• Cast Iron Dies
• Sugar Mill Rollers
• Joining cast iron to mild steel.

Ador Fontech lh 117 cast iron welding electrodes

Features

• Non-machinable electrode for welding cast iron
• Welding or surfacing of cast iron
• Joining Of Cast Iron To Steel
• For Obtaining Better Machinability

Ador Fontech lh 119 cast iron welding electrodes

Features

• Extremely crack resistant nickel iron alloy electrode for welding cast iron
• An unique electrode for cold welding of cast iron without preheat and for joining cast iron to mild steel

Application:

• Repairing Intricate Cast Iron Parts
• Water Pump Housing
• Electric Motor Bodies And Covers
• Machine Frames

Ador Fontech LH 119S Cast Iron Welding Electrodes

Features:

• Crack resistant nickel-iron electrode for welding all types of machinable low alloy and unalloyed cast iron
• Cold welding of all types of unalloyed and low alloy cast irons

Applications

• Malleable Cast Iron
• Correcting Machining Error
• Joining Of Machinable Grey Cast Iron To Carbon Steel
• Welding Of Grey Cast Iron & Repair Of Foundry Castings

Stainless Steel Welding Electrodes Lh 125

Austenitic stainless steel acid-resistant electrode for welding AISI 316, 316L TECHNICAL DATA UTS : 54-64 kgf/mm2 Elongation: 30-40% TYPICAL APPLICATIONS Welding of Austenitic stainless steels, Cr-Ni-Mo steels of the type 18 Cr / 8 Ni+Mo (V4A, AISI 316, Ugine NSM 22, Avesta 832 SK, Soderfors 564, Sandvik OR 60, UHB stainless 24, etc.). Dyeing and dairy equipment, Chemical vessels, Brewery and food equipment.

Mild Steel Ador Fontech LH 126 Welding Electrode

Product Details:

• UTS : 55-65 kgf/mm 
• Elongation : 30-35% 
• Sizes Available:2.5, 3.2, 4.0 mm
• Keep Electrodes Dry
• Length Available:2.5×350, 3.2×350, 4.0×350 
• Amps Available: 50-75, 90-110,120-140
• Low Heat Input Welding Alloys

Properties:

• Fully Austenitic weld deposit, heat resistant upto 1200 DegC in oxidizing and sulphur free atmosphere.

Procedure:

• De-grease and clean the area to be welded. 
• O For heavy thickness prepare a 60 included angle V. 
• Fit up should be accurate for long joints. 
• Weld at regular intervals and use jigs & fixtures to avoid distortion. 
• Use DCRP (DC+) on DC Power Source for good ripple & finish. 
• Stringer bead technique with shortest possible arc length is recommended.

Features:

• Cement Industry for Anchor Welding
• Furnace Linings
• Furnace Parts
• Burners
• Heat Treatment Pots and Baskets.

Applications:

• For hardfacing of parts subject to heavy abrasion and metal-to-metal wear with mild impact and temperature upto 650 DegC. 
• Suitable for: refractory press screws, brick press screws, cement press screws, palm oil expeller flights, conveyor screws, impellers, dredging cutter & drag head, runner bottom edge, pug mill, knife, wing knife, auger, boring bits, blast furnace bells and hoppers.
• Welding of Austenitic stainless steels, heat resistant Cr-Ni steels of the type 25 Cr/20 Ni (NCT, A/Si, 310, Ugine NS 30, Avesta 254E, Sandvik 15RE 10).
• Also suitable for welding of steels with high carbon content often used in the cement industry for anchor welding, Furnace linings, furnace pads, burners, heat treatment pots and baskets.

Alloy Basis: : Fe, Cr, Ni

Mild Steel Ador Fontech LH 126 Welding Electrode

Stainless Steel Welding Electrodes (Lh 126 Hc)

Product Specifications

Product Overview

Key Features

With the aid of our experienced team, we are devoted towards manufacturing and supplying of the Stainless Steel Welding Electrodes (LH 126 HC) in Gurgaon, Haryana, India. All our provided products are designed as per the global quality norms by utilizing optimum quality of product with the aid of sophisticated designing tools and machinery.A A These products are designed using latest technology and supreme quality raw material at our vendors manufacturing unit.

Its Product Details are:
UTS60-70 kgf/mm2
Brand :Ador Fontech
Condition :New
Modal Number :LH 126 HC

Its Uses are:
Cement Industries
Fertilizer Industries
Oil Refineries
Petrochemical Plants
Steel Industries

Ador Fontech lh 206 non-ferrous welding electrodes

Features

• Electrode For Welding Pure Copper
• Welding Of Deoxidized And Tough-pitch Or Electrolytic Copper

Application:

• Copper Plants
• Chemical Industries
• High Electrical Conductivity Joints

Ador Fontech lh 214 ac non-ferrous welding electrodes

Non Ferrous Welding Electrodes (Lh 214 Ac)

Product Specifications

Product Overview

Key Features

Matching up with the requirements of our customers, our organization involved in manufacturing and supplying Non Ferrous Welding Electrodes in Gurgaon, Haryana, India. Only under the strict supervision and management of our team members, we make certain that the products are packed as per the set standards; by this we are capable of delivering the range safely. We have become a preferred choice of the customers owing to our timeliness and customers centric approach.

Features-
Tin-bronze electrode for welding bronze parts
Overlays on pumps, shafts, bearing surfaces

Specification-
Tensile Strength : 42,000 PSI
Brand : Ador Fontech
Condition : New
Model No. : LH 214 AC

Metal Lh 214 Dc Ador Welding Electrode

Mild Steel Ador Fontech-214DC Welding Electrode

Product Specifications

Company Details

We, A.N. Gupta & Co., established in 2006, are the leading manufacturer and supplier of a wide range of products such as Xuper 2233 N L And T Welding Electrode, EutecTrode Xuper 66 XHD Welding Electrode, L And T EWAC Alloy Welding Electrode, etc. We focus all of our efforts on exceeding clients expectations by providing high-quality items that meet their needs precisely. Furthermore, in order to maintain good customer relationships, we adhere to moral business practices and absolute transparency in all of our dealings. We owe our success to our founder Arun Kr Jindal, whose unwavering support and guidance have helped us achieve exponential growth in the current industry. To know more about our company customers can freely ask us, it will be our pleasure to serve you.Our Team

Manual Non Ferrous Welding Electrodes (Lh 215)

Product Specifications

Product Overview

Key Features

Leveraging over the skills of our qualified team of professionals, our organization instrumental in manufacturing and supplying large range of Non Ferrous Welding Electrodes in Gurgaon, Haryana, India. We provide secured online and offline payment processing methods. The transaction, done through online mode, is instantly forwarded to the payment system. We also accept bank account transfers, cash payments, etc.

Specification-
Tensile Strength : 68,000 PSI
Electrode Type : Non-ferrous Welding Electrodes
Model No. : LH 215
Brand : Ador Fontech
Condition : New

Features-
Aluminium bronze electrode
Joining and surfacing of aluminum bronze

Silver Non Ferrous Welding Electrodes (Lh 409)

Lh 409

Product Specifications

Product Overview

Key Features

To meet the various requirements of the customers, our organization involved in manufacturing and supplying a large assortment of Non Ferrous Welding Electrodes in Gurgaon, Haryana, India. To protect our products from being damaged during transit/ handling, we use industrial grade packaging materials. Our well-structured warehouse is properly managed and maintained by our adroit professionals. Moreover, we keep on updating the unit for better safety.

Features-
Electrode for welding aluminium
Aluminum electrode for repair welding wrought & cast aluminum alloys

Specification-
Tensile Strength : 28,000 PSI
Electrode Type : Non-ferrous Welding Electrodes
Model No. : LH 409
Brand : Ador Fontech
Condition : New

catalogue

Stainless Steel Ador LH 521

We, A. N. Gupta & Co., are offering a wide range of varieties in industrial nd commercial products. We are doing this business for more than 20 years with extreme loyalty and honesty. We always put our customer’s satisfaction in our top most priority list.

Ador Fontech LH 710 Hard Facing Welding Electrodes

Features:

• Electrode for tough and wear-resistant against friction
• Surfacing of parts subject to wear by friction and mild impact

Application:

• Rims
• Carbon-alloyed rails
• Striking tools
• Rolling surfaces
• Stampers
• Concrete Mixer Blades

Ador Fontech LH 713 Hard Facing Welding Electrodes

Features:

• Austenitic manganese steel electrode for high impact resistance.
• For joining manganese steel / Hadfield steel parts and hardfacing of parts subject to heavy impact and stress.

Application:

Hammers

Crushing Equipment

Rocks

Jaws

Cones

Gyratory Crushing Mantles

Excavator Teeth

Manganese Rails

Ador Fontech LH 7141 Hard Facing Welding Electrodes

Features:

• High deposition efficiency manganese steel electrode specially designed for surfacing rail crossings
• For welding of 13% Mn steel rail crossing where minimum 15 GMT life of the rail crossing is required

Application:

• Bullet Proof Armour Quality Steel Plate
• Hard Or Unidentified Steels
• Heavy, Crack Free Build-ups

Ador Fontech LH 720 Hard Facing Welding Electrodes

Features:

• Surfacing electrode with chromium carbide for abrasion resistance
• Wear resistant surfacing of mild and low alloy steels

Applications:

Scrapper Blades

Building up machine parts

Digger Teeth

Bucket Teeth And Edges

Conveyer Screws

Mixer Wings

Ador Fontech LH 726 B Hard Facing Welding Electrodes

Features:

• Special cobalt-based alloy for surfacing plain carbon and alloy steels
• Surfacing of work-pieces requiring high corrosion

Applications:

• Oxidation
• Heat And Impact Resistance
• Surfacing of valves
• Conveyer Screws
• Knives
• Dies
• Hot-shearing Blades

Carbon Steel Ador LH 743 N Welding Electrode

Electrode With High Chromium Carbide Deposit For Excellent Resistance To Abrasion And Heat.

Typical Applications

Hard Surfacing Of Parts Which Are Subject To Severe Abrasive Wear And Moderate Shocks. Conveyer Screw Flights, Mixer Blades, Auger Screws, Dredging Cutter, Runner Bottom Edge, Pug Mill, Blast Furnace Bells & Hoppers.
Size 
40MM
50MM

Ador Fontech LH 743 S Hard Facing Welding Electrodes

Features:

• Hard surfacing electrode with very high metal recovery for excellent resistance against abrasion
• For hardfacing of parts subject to heavy abrasion and metal-to-metal wear

Applications:

• Refractory Press Screws
• Brick Press Screws
• Cement Press Screws
• Palm Oil Expeller Flights
• Conveyor Screws
• Impellers
• Dredging Cutter & Drag Head
• Wing Knife

Hard Facing Alloys Electrode

Our Range:

• LH 700 F : Flex coated wear-resistant bronze alloy
• LH 7071 : Electrode for depositing fully austenitic weld metal with max. crack resistance
• LH 708 : Hot work tool steel electrode
• LH 710 : Electrode for tough and wear-resistant surfacing alloy deposit
• LH 710 BF : Specially coated electrode for surfacing of dies and tools in forging industry
• LH 711 : Highly wear-resistant, tough surfacing electrode
• LH 713 : Special austenitic manganese steel electrode
• LH 714 S : High deposition manganese steel electrode
• LH 7140 : Extremely resistant to impact and pressure
• LH 715 : Electrode for surfacing of high speed steels
• LH 717 : Corrosion and oxidation-resistant surfacing and joining electrode
• LH 717 S : Joining and surfacing electrode for corrosion and oxidation resistance
• LH 718 : Electrode for abrasive and corrosive conditions even at elevated temperatures
• LH 720 : Surfacing electrode depositing chromium carbide
• LH 721 : Alloy containing tungsten carbides
• LH 725 : Surfacing electrode depositing chromium carbide
• LH 7251 : Surfacing electrode depositing chromium carbide with very high recovery
• LH 726 B : Special cobalt-based alloys for surfacing plain carbon and alloy steels
• LH 738 S : ‘Spray’ type, extra high, wear-resistant electrode having complex carbides
• LH 743 N : Electrode with high chromium carbide content for hard surfacing deposits
• LH 743 S :Hard surfacing electrode with very high metal recovery
• LH 7430 : Excellent abrasion resistance
• LH 745 S : Surfacing electrode with exceptional hardness and abrasion resistance
• LH 7450 :  Extremely resistant to abrasion at room and high temperatures
• LH 7461 : Highly abrasion-resistant, hard surfacing electrode with very high metal recovery

Ador FOntech LH 900 Gouging Electrode

Electrodes for grooving without oxygen

Old Name E 900

Application :

• For chamfering, gouging and making grooves in all industrial metals

Ador Fontech lh 901 cutting and gouging

Features:

• Cutting and piercing of steel
• cast iron
• copper materials
• Excellent for burning rivets
• Oxyacetylene or compressed air need not be used